Brewtools

Awesome non-compromise breweries from Norway with loads of accessories.

  • Brewtools B40pro Brewing System (EU)

    Brewtools B40pro Brewing System (EU)

    The Brewtools B40pro is a brewing system without compromise. Built for enthusiasts.- 46-liter (12 gal) tank volume and 9kg (20 lb) malt capacity.- 20-40 liter (5-11 gal) pre-boil volume for...
    £1 587
  • Brewtools B80pro Brewing System (EU)

    Brewtools B80pro Brewing System (EU)

    The B80pro is a brewing system without compromise. Built for enthusiasts.- 90-liter (23 gal) tank volume and 20kg (44 lb) malt capacity.- 30-80 liter (8-21 gal) pre-boil volume for flexibility-...
    £2 028
  • Brewtools B150pro Brewing System (EU)

    Brewtools B150pro Brewing System (EU)

    Brewtools B150pro - the largest pro-series system, is a brewing system without compromise. Built for enthusiasts, nano breweries and brewpubs.- 170-liter (44 gal) tank volume and 35 kg (77 lb) malt...
    £2 734
  • Brewtools Starter Pack 2-valve Setup

    Brewtools Starter Pack 2-valve Setup

    This is the recommended accessories to get you started using Brewtools pro systems, B40pro/B80pro/B150pro. The package includes an efficient counterflow cooler, an extra 3-way valve to make you able...
    £617
  • Brewtools Starter Pack 3-valve Setup

    Brewtools Starter Pack 3-valve Setup

    This is the recommended accessories to get you started using Brewtools pro systems, B40pro/B80pro/B150pro. The package includes an efficient counterflow cooler, an extra 3-way valve to make you able...
    £785
  • Brewtools Starter Pack 4-valve Setup

    Brewtools Starter Pack 4-valve Setup

    Starter packer for a complete 4-valve setup for your Brewtools B40pro/B80pro/B150pro. The package includes an efficient counterflow cooler, three extra 3-way valves to make you able to choose if...
    £1 010
    Temporarily out of stock

    Please enter your email so we can inform you when the product is back in stock.

  • Brewtools B40pro Insulation Jacket

    Brewtools B40pro Insulation Jacket

    Flexible insulation jacket for your Brewtools B40pro. Zippers make it easy to take on and off the brewer. It insulates and retains heat better so you use less energy to heat the vessel.· Black· 5 mm...
    £49
  • Brewtools B80pro Insulation Jacket

    Brewtools B80pro Insulation Jacket

    Flexible insulation jacket for your Brewtools B80pro. Zippers make it easy to take on and off the brewer. It insulates and retains heat better so you use less energy to heat the vessel.· Black· 5 mm...
    £53
  • Brewtools B150pro Insulation Jacket

    Brewtools B150pro Insulation Jacket

    Flexible insulation jacket for your Brewtools B150pro. Zippers make it easy to take on and off the brewer. It insulates and retains heat better so you use less energy to heat the vessel.· Black· 5...
    £67
  • Brewtools Trubinator S

    Brewtools Trubinator S

    Brewtools Trubinator S can be used in Brewtools B40 brewing system. During the whirlpool, hops and other particles will collect in the middle of the filter, making it possible to pump out clearer wort...
    £80
    Temporarily out of stock

    Please enter your email so we can inform you when the product is back in stock.

  • Brewtools Trubinator M

    Brewtools Trubinator M

    Brewtools Trubinator can be used in Brewtools B80 brewing system. During the whirlpool, hops and other particles will collect in the middle of the filter, making it possible to pump out clearer wort...
    £115
  • Brewtools Trubinator L

    Brewtools Trubinator L

    Brewtools Trubinator L can be used in Brewtools B150pro brewing system. During the whirlpool, hops and other particles will collect in the middle of the filter, making it possible to pump out clearer...
    £150
  • Brewtools Sparge Manifold S

    Brewtools Sparge Manifold S

    Sparge manifold for simple spreading of sparge water over the grains. It can also be used as a mash manifold during mashing for a more efficient distribution of wort over the grainbed. Made...
    £62
    Temporarily out of stock

    Please enter your email so we can inform you when the product is back in stock.

  • Brewtools Sparge Manifold M

    Brewtools Sparge Manifold M

    Sparge manifold for simple spreading of sparge water over the grains. It can also be used as a mash manifold during mashing for a more efficient distribution of wort over the grainbed. Made...
    £71
    Temporarily out of stock

    Please enter your email so we can inform you when the product is back in stock.

  • Brewtools Sparge Manifold L

    Brewtools Sparge Manifold L

    Sparge manifold for simple spreading of sparge water over the grains. It can also be used as a mash manifold during mashing for a more efficient distribution of wort over the grainbed. Made...
    £80
  • Brewtools Steam Condenser

    Brewtools Steam Condenser

    Our steam condenser fits our steam hat and uses cold water to cool the steam until it becomes a liquid that runs out of the condenser to a bucket or directly to the drain. The unit is an excellent...
    £306
    Temporarily out of stock

    Please enter your email so we can inform you when the product is back in stock.

  • Brewtools B40pro Steam hat

    Brewtools B40pro Steam hat

    Brewtools Steam hats are designed for maximum flexibility. They feature a silicone edge seal, 4 clamps to hold it in place on your brewing system, a 110mm inspection hole you can add your hops through...
    £186
  • Brewtools B80pro Steam hat

    Brewtools B80pro Steam hat

    Our pro steam hats are designed for maximum flexibility. They feature a silicone edge seal, 4 clamps to hold it in place on your brewing system, a 110mm inspection hole you can add your hops through...
    £232
    Temporarily out of stock

    Please enter your email so we can inform you when the product is back in stock.

  • Brewtools B150pro Steam hat

    Brewtools B150pro Steam hat

    Brewtools steam hats are designed for maximum flexibility. They feature a silicone edge seal, 4 clamps to hold it in place on your brewing system, a 110mm inspection hole you can add your hops through...
    £314
  • Brewtools Inline Oxygenation Kit

    Brewtools Inline Oxygenation Kit

    An inline oxygenation kit for B40, B80 & B150 designed to inject oxygen during transfer to fermenter. We recommend placing a sight glass after the TC tee, to keep an eye on the O2 flow. Requires...
    £112
  • Brewtools Overflow pipe kit

    Brewtools Overflow pipe kit

    The overflow pipe kit is a solution for the malt pipe in our brewing system. It makes it simple to avoid dry heating elements and grains in your wort.The system is fastened to your filter (Punch out...
    £80
  • Brewtools Tri-clamp 34mm

    Brewtools Tri-clamp 34mm

    34mm TC-clamp (Tri-Clamp).
    £7,5
  • Brewtools Tri-clamp 34mm gasket 5-pack

    Brewtools Tri-clamp 34mm gasket 5-pack

    5-pack gaskets for 34mm Tri-clamps.
    £1,7
  • Brewtools 4” Tri-clamp

    Brewtools 4” Tri-clamp

    Tri Clamp for connecting two TC 4" fittings. Used to connect accessories to our steam hats.

    Gasket is sold separately.
    £17
    Temporarily out of stock

    Please enter your email so we can inform you when the product is back in stock.

  • Brewtools Tri-clamp gasket 4”

    Brewtools Tri-clamp gasket 4”

    TC 4" gasket in food grade silicone.
    £4
    Temporarily out of stock

    Please enter your email so we can inform you when the product is back in stock.

  • Brewtools Tri-clamp 34mm Elbow 90°

    Brewtools Tri-clamp 34mm Elbow 90°

    TC34mm elbow, 90°
    £22
    Temporarily out of stock

    Please enter your email so we can inform you when the product is back in stock.

  • Brewtools Tri-clamp 34mm to Garden Connector

    Brewtools Tri-clamp 34mm to Garden Connector

    Tri Clamp fitting for use with garden connectors. Used to connect tap water to your cooler or for filling your brewing systems.
    £19
  • Brewtools Cable extension kit 2.5m

    Brewtools Cable extension kit 2.5m

    Using the cable extension kit you can place the controller away from the brewing systems, enabling a more flexbile setup. 2,5m.
    £159
  • Brewtools Mash paddle with a hook & drill adapter

    Brewtools Mash paddle with a hook & drill adapter

    Paddle made from high quality SS304 steel. The paddle has a practical hook to hang it on the inside the brewing system or the malt pipe.We've also milled a tap on the end of the handle, which makes it...
    £37
  • Brewtools Mash paddle (Long)

    Brewtools Mash paddle (Long)

    Paddle made from high quality SS304 steel. The paddle has a practical holder on the shaft to hang it on the inside of the tank or malt pipe and it has a T-handle for comfortable use.

    Length: 78cm
    £45